![]() STEP ONE: Here are the chemicals you'll need to close your pool. |
![]() STEP FIVE: Lubricate All Bolts with a quality Anti-seize compound. |
![]() STEP TWO: Lower your water line 2" - 6" below the skimmer. |
![]() STEP SIX: Put All other Bolts, Nuts, Anchors in a container full of oil (10W-30). |
![]() STEP THREE: Get your water bags ready while the water line drops. |
![]() STEP SEVEN : Sink underwater light. |
![]() STEP FOUR: Remove Hardware - Diving Board, Hand Rails & Ladders. |
|
|
SARNIA POOL COMPANY |
|
![]() STEP EIGHT: Now you prepare your Pump and Filter for Winterizing. |
![]() STEP ELEVEN: Put the cap back on. |
|||||
![]() STEP NINE: Blow out the lines. |
||||||
![]() STEP TEN: Blow out returns and insert plugs, then pour in antifreeze. |
|
|
SARNIA POOL COMPANY |
![]() STEP THIRTEEN: Put Anti Freeze in the Slide Hose. ![]() STEP FOURTEEN: Put your empty anti-freeze jug in the skimmer mouth. Now you are almost done. |
![]() STEP SIXTEEN: Remove all Equipment Plugs. ![]() STEP SEVENTEEN: Store Solar Blanket. |
![]() STEP FIFTEEN: Next you must drain the Filter. |
![]() STEP EIGHTEEN: Brush out any air pockets under the cover. Congratulations, your pool is now closed. |
|
SARNIA POOL COMPANY |
|